The brake pads on both sides of the fixed caliper

25/feb/2016 09.06.33 Vertical splitter Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

Automobile brake linings commonly known as "brakes", a car braking system is an important safety feature. When the following four cases, the brake pads should be replaced:

1. The thickness of the brake pads is less than the minimum maintenance standards permitted when the vehicle manufacturer.

2. Ceramic Brake Pad wear warning switch on the alarm already.

3. The brake pads are contaminated with oil or grease when.

4. The brake pads during braking when there is abnormal noise. Under normal circumstances, if the difference in the thickness of the brake pads on both sides of the fixed caliper reaches 1.5mm, the thickness of the brake pads on both sides of the difference between the floating caliper on reaching 3.0mm on the need for replacement.

However, only unable to accurately determine whether the brake pads wear through simple observation of appearance, it is best to use a ruler to measure the thinnest brake pads to see if its allowed range.

Recommendation to buy brake pads should be chosen according to their own models to match the brake pads going from factory direct store purchase ancillary products, or to the designated repair point to
China Brake Factory  replace the automobile brake pads.

blog comments powered by Disqus
Comunicati.net è un servizio offerto da Factotum Srl