Car knowledge: Automotive leather chairs of the production process

System board is the most basic of the most important work, AUDI TT Quattro turbocharger is an important indicator of quality leather chairs.

Luoghi
Argomenti internet

26/gen/2016 09.36.45 moferlo Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

 

System board is the most basic of the most important work, AUDI TT Quattro turbocharger is an important indicator of quality leather chairs. We recommend that owners choose experienced professional technician check.

The first step in cutting leather

After the system board, it is necessary to enter the process of cutting the skin. Cattle leather, leather is most suitable as part of the seat back and cushion, because these two seats prolonged pressure and friction. Cattle neck, tripe cortex poor, generally used for the skirt portion of the seat or not easy to see the site. Also note that skin stretching direction of the force, if the direction of cutting the skin properly, will result in one or two months after the emergence of the phenomenon of irregularities.

Two-step sewing

The leather cut up, you enter the sewing process. Generally in the leather pad thickness 13 mm below the upper and lower band network at the end of the sponge liner. Once sewn leather will not be modified, otherwise it will leave a visible needle marks. Remember to check the uniformity of open-wire gauge, presence or absence of exposed skin head, with or without flash and thread, audi a4 turbocharger wire and leather colors are the same and so on.

The third step suit seat

When set, the slightest mistake will holster tear or scratch, put through after beating, pulling the holster attached to a seat on it. Select rust leather fixed staple; size distribution of staples, elastic should be uniform. In addition, the seat cushion seam to be symmetrical and tidy.

The fourth step back mounted seat

Doors, interior space is limited, the seat of the size and weight is not small, M3 Control arms back to loading is necessary to avoid grazing scratch the seat surface and paint must be done in accordance with back loading process requirements.

Usually five car leather chairs make long 3-4 hours to complete.

blog comments powered by Disqus
Comunicati.net è un servizio offerto da Factotum Srl