Do you know how to refurbish Samsung S6 Edge screen

23/giu/2017 08:11:08 iPhone parts Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

Not only users, even technicians of repairing and refurbishing have headaches. A Little mistake can ruin the whole screen. Then you will need to bear a lot! One day when you overcome this issue and well grasp this skill, we could say that you’re the best! If you’re ready to refurbish, the below may help you.

Step 1. Separate the glass from the LCD screen.

Set the frozen separator machine to -140℃ put the LCD screen into the machine with the glass face down for the 30s. Then use the pry piece separate the glass from LCD screen.

Step 2. Remove the LCD adhesive.

Remove the LCD with the non-dust cloth dipped the cleaning agent also you can use a plastic card.

Step 3. Laminate the OCA.

Laminate the OCA manually with the roller and then put in the bubble removing machine to remove bubbles. (Before laminating you should make sure there are no dust on the LCD surface)

Step 4. Laminate the LCD screen

Put the LCD in a mold, tear off the LCD protective film, align the glass to the LCD and put it in the laminate machine. (You should make sure no dust on the glass before laminating)

Step 5. Remove the bubbles in the LCD screen

Put the LCD screen into the bubble removing machine again, when taking it out you will find it looks like a new one.


To read the orgianl article please visit

blog comments powered by Disqus è un servizio offerto da Factotum Srl