Use of self drilling hollow anchor bolts of Sinorock for stabilizing bare soil surfaces

21/lug/2016 08:58:31 sinorockzqq Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

As concrete structures become more complex, the self drilling anchor systems used to connect steel to concrete and concrete to concrete add to the problem. This had made it necessary to demolish aging buildings and to reconstruct them in a structurally satisfactory manner.

Anchor bolt - mechanical component can consist of conventional retaining walls, either the gravity or cantilever type, or a reinforced earth structure. Structural-mechanical stabilization techniques are called for in cases where the potential for deep-seated slope movement or high, lateral earth stresses exists.

Unprotected natural or constructed earthen slopes are a major point source erosion problem that can result in serious sediment flows to lower catchment sites, contamination of rivers and streams, water quality reduction, slope failure and slippage that often result in landslides, economic damage to property, and loss of life. The rock anchor System of Sinorock can effectively and at low cost, protect slopes, stop or significantly reduce the risk of slippage,and prevent the soil loose.

self drilling hollow anchor bolt

The simplest and most cost effective means of stabilizing bare soil surfaces is through the use of self drilling hollow anchor bolts of Sinorock.

We are capable of producing hollow anchor bolts to many different standard and nonstandard sizes. Diameter ranges from 25 to 130, and length tops out at 72.” We have high competency in manufacturing a series of rock anchor bolt styles, including hexagonal, square, round, countersunk, flanged, socket, and 12-point. A plethora of standard materials is available for each, as well as high-strength engineered materials such as 

Hot-dip galvanizing, epoxy coating, and Stainless steel. Many protective and anti-corrosion coatings and treatments may be added, including brass, chrome, galvanization, nickel, composite, and specialty layers. Additional procedures and features like passivation, sterilization, case hardening, heat treating and soil nailing  may be applied as well.

blog comments powered by Disqus
Comunicati.net è un servizio offerto da Factotum Srl