With wide selection of drill bits Sinorock self drilling micropile can used whatever conditions

02/nov/2016 09:08:02 sinorockzqq Contatta l'autore

Questo comunicato è stato pubblicato più di 1 anno fa. Le informazioni su questa pagina potrebbero non essere attendibili.

The quickest way to micropile

The Sinorock Large Diameter Anchor Bolt installation process is remarkably quick since it is executed in one single operation. Other micropiling methods, for example drilled casings,need up to three separate operations to complete a similar micropile. Large Diameter Anchor Bolt minimizes the total installation time and increases productivity. In

fact, it’s not unusual for an operator to install 25 to 30, 15m (50 ft) long piles per day. When installing Large Diameter Anchor Bolt systems, cement grout is simultaneously injected into the rod, out through the bit and distributed evenly into the surrounding ground. The rod and bit are then left in place to act as the pile’s reinforcement element. Once the cement sets, the ground consolidates and forms a friction pile.Compact tophammer rigs

Sinorock self-drilling micropiles can be installed with most tophammer rigs,for example the Atlas Copco Mustang rigs. These compact rigs have to work in very cramped conditions and thanks

to the option to produce short rods,there’s always room to add rods and install micropiles with the required length. This method needs very little site preparation while noise and vibrations are very low. And as T111 drilling equipment are considered light weight,many of these urban worksites are easy to access.

The flexible self drilling micropile 

Primarily aimed at unconsolidated soil formations such as sand and gravel, the

Sinorock self drilling micropile is ideal for difficult micropiling.

In particular in granular deposits the impregnation of grout into the surrounding

ground significantly enhances the geotechnical capacity of the pile.

However, thanks to the wide selection of drill bits Sinorock self drilling micropile is able to drill through anything from sand and clay to rock. Where there are new buildings to be built close to existing structures or where heavy industrial equipmentis being installed in existing factories,

Sinorock self drilling micropile fits the bill. These piles

work well as both tension and compressionpiles. They can be installed

on a rake or inclined angle to providereticulated pile solutions.

blog comments powered by Disqus
Comunicati.net è un servizio offerto da Factotum Srl